High performance liquid chromatographic separation of cholesterol oxidation products

Summary A fast, sensitive, high performance liquid chromatographic method for the simultaneous determination of cholesterol hydroperoxides and other major oxysterols, using two different detection systems (ultraviolet at 210 nm and light scattering), is here described. The hydroperoxy derivatives were obtained by cholesterol photoxidation, isolated by thin layer chromatography and joined with a standard mixture of 10 oxysterols (epoxy, hydroxy and keto derivatives). Aliquots were directly injected onto a 5-μm particle size, 25×0.46 cm i.d. Spherisorb S5 CN normal phase column, usingn-hexane/anhydrous ethanol (97:3, v/v) as mobile phase and a flow rate of 0.8 mL min⁻¹. This method allowed, in a single isocratic analysis, the separation and quantification of the primary and secondary cholesterol oxidation products in 30 minutes. The light scattering detector was particularly useful for the determination of nonderivatized 5,6-epoxides and cholestane-3β,5α,6β-triol. The sensitivity of both detectors was very similar for most of the oxysterols, except for the 5,6-epoxides and the 7-ketocholesterol. The method suitability for the determination of cholesterol oxidation products in food matrices was successfully tested on a saponified lipid extract from egg yolk powder.     

Stereoselective conjugate addition of benzyl phenylsulfonyl carbanions to enoates derived from d-mannitol

The conjugate addition of benzylic phenylsulfonyl carbanions (2a'-d') to enoates derived from d-(+)-mannitol (E- or Z-1a-c) was studied using THF and THF/HMPA as solvent. Under kinetic conditions (-78 degrees C), enoate E-1a,b led to a mixture of syn-(R,S) and anti-(S,S) adducts (55/45), and syn-(R,S) adducts were the main product obtained ( approximately 90/10) from enoate Z-1a. Under thermodynamic conditions (-78 degrees C to room temperature) syn-(R,S) adducts were also preferentially formed ( approximately 90/10), despite the geometry at the double bond in the acceptor. Enoate 1c (E/Z = 57/43), bearing an additional benzyl group at the alpha-position, also reacted with carbanions 2'a,b, under thermodynamic conditions, leading to syn-adducts in excellent de (control at the three newly generated stereogenic centers). The adducts were quantitatively transformed into the corresponding beta-gamma-disubstituted gamma-butyrolactones and alpha,beta,gamma-trisubstituted gamma-butyrolactones. (1)H NMR studies (NOE and J-coupling) of these lactones allowed us to determine their configuration at the newly generated chiral centers. The reduction of the C-S bond in adducts syn-(R,S) with Na/Hg, followed by treatment of the resulting products in aqueous acid media, led to enantioenriched beta-benzyl-gamma-hydroxymethyl-gamma-butyrolactones. The conformational equilibrium of enoates E- and Z-1b was evaluated by theoretical calculations (ab initio, MP2/6-31G), and a mechanistic rationale was proposed to explain the observed stereoselectivities.     

Study of structural transformations of equiatomic compounds of rare earth metals with copper

Electrical resistivity, magnetic susceptibility, X-ray diffraction and differential thermal analysis have been performed over a wide temperature range on binary compounds RCu. Melting points or decomposition temperatures for RCu (R=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb and Dy) phases and a number of FeB-CsCl structural transitions are reported, and heats and entropies of transformation are evaluated. Large hysteresis effects are observed for the structural transformations at different temperatures.In LaCu and CeCu no structural transformation was detected, while TbCu and DyCu failed to reveal any high-temperature thermal effect of transformation. In EuCu a nonreproducible thermal effect was evidenced after thermal cycling.

---

Zusammenfassung Messungen der elektrischen Leitfähigkeit und der magnetischen Susceptibilität sowie röntgendiffraktometrische und differentialthermoanalytische Untersuchungen von binären Verbindungen des Typs RCu wurden in einem weiten Temperaturbereich ausgeführt. Schmelzpunkte bzw. Zersetzungstemperaturen von RCu-Phasen (R=La, Ce, Pr, Nd, Sm, Eu, Gd, Tb und Dy) und eine anzahl von Phasenübergängen im System FeB-CsCl sind zusammen mit den bestimmten Entropiewerten der Phasenübergänge angegeben. Die Temperaturabhängigkeit der Phasenübergänge weist eine ausgeprägte Hysterese auf. In den Systemen LaCu und CeCu konnten keine Phasenübergänge festgestellt werden, während sich bei TbCu und DyCu kein auf einen Phsenübergang hinweisender thermischer Effekt im Hochtemperaturbereich zeigt. Bei EuCu wurde ein nicht-reproduzierbarer thermischer Effekt nach einem thermischen Kreisprozeß nachgewiesen.

---

, , RCu. RCu (=La, , Pr, Nd,Sm, Eu, Gd, Tb Dy) , FeB-CsCl, . . LaCu , TbCu DyCu - . EuCu .

---

---

The authors are grateful to Prof. A. Iandelli for his interest and for helpful discussion.

---

This work was supported by the Italian Consiglio Nazionale delle Ricerche.     

A new polyphenol modified electrode containing an anchored ruthenium complex and its use in electrocatalytic oxidation of organic substrates

This work describes the preparation of a new modified electrode containing a ruthenium complex (cis-aquadimethylbipyridyltriphenylphosphineruthenium II), bonded to a stable polyphenol film. This modified electrode promotes the fast electrocatalytic oxidation of safrol (5-allyl-benzo[1,3]dioxole) and isosafrol (5-propenyl-benzo[1,3]dioxole), giving two interesting products benzo[1,3]dioxole-5-carbaldehyde (piperonal) and 3-benzo[1,3]dioxol-5-yl-propenal respectively, with good yields. The electrode preparation can be carried out at a potential range which does not interfere on the anchored electroactive ruthenium complex, but it allows for the phenol oxidation to occur and therefore polymerize forming the polyphenol film. The catalytic character of this modified electrode is showed by its high turnover numbers. The procedure to isolate the products is very simple.     

Transition metal-catalysed sequences of nucleophilic addition

Summary In presence of nickel or palladium catalysts, nucleophiles can attack vinylcyclopropanes with concomitant ring cleavage. With palladium catalysts in presence of appropriate substituents the terminal carbon atom of the resulting open chain is able to add to two molecules of a conjugated diene giving rise to long-chain unsaturated compounds.     

Thermal and Microstructural Analysis of the Y–Ba–Cu–O/Ag Equilibrium Around the Critical Composition YBa2Cu3Ox/Ag 35 mass%

We studied the Y–Ba–Cu–O/Ag equilibrium diagram in oxygen atmosphere around the composition YBa₂Cu₃O_x/Ag35 mass%. We found a high thermal effect: the peritectic decomposition temperature of Y-123 phase is lowered from 1040 to 940°C. We demonstrate here that the nature of the phenomenon is not chemical. We explained it as the result of a mechanical segregation of Y-123 decomposition products from Y-123 phase, performed by silver. This revised version was published online in July 2006 with corrections to the Cover Date.     

Transition metal-catalysed organic reactions promoted by chelating or metallacycle-forming substrates

Chelating or metallacycle-forming substrates are very useful for directing organometallic reactions. This review covers the more recent research that has been carried out in the authors' laboratory. Rhodium(I)- and (III)-catalysed reactions of C---C coupling of butadiene with N-allylamides or N-alkylbutenamides are described. These reactions are controlled by the size and strength of the chelate ring formed by double-bond insertion into the crotyl-rhodium bond (formed from butadiene) and their regioselectivity can change with the oxidation state of the metal. Rhodium(I)-catalysed reactions of butadiene with enamides are also chelation controlled and lead to different products, depending on the substituents at nitrogen. Cobalt(II) metallacycles have been utilized for promoting some organic reactions. It has been shown that alkenes can be catalytically incorporated into cobaltacyclopentadiene rings, that spirocycles can be obtained from diynes, carbon monoxide and acrylic esters and that a Pauson-Khand-type reaction can be combined with a Michael-type reaction to prepare catalytically new cyclopentenones. The use of palladacycles, derived from norbornene insertion into aryl-palladium bonds, followed by cyclization, has allowed the selective functionalization of either end of the metallacycle and the formation of condensed rings. Conversion of a palladium(II) into a palladium(IV) metallacycle, and catalytic processes involving these intermediates, have been achieved. The formation of alkylaromatic palladacycles has also been exploited for the selective meta functionalization of the aromatic moiety by means of alkyl groups, accompanied by expulsion of the norbornene molecule.     

High-spin to low-spin relaxation kinetics in the [Fe(TRIM)2]Cl2 complex

A quasi-quantitative photo-induced low-spin (LS)-->high-spin (HS) conversion of FeII ions has been observed in the [Fe(TRIM)2]Cl2 complex by irradiating the sample with blue light (488 nm) at 10 K. The time dependence of the HS-->LS relaxation has been studied between 10 K and 44 K by means of magnetic susceptibility measurements. These relaxation curves could be satisfactorily fitted by mono-exponential decays including tunnelling effect except for temperatures below 30 K. The introduction of a distribution of vibrational frequencies into this model improved significantly the fits in the low-temperature range and gave a good agreement with the experimental data in the whole temperature range suggesting a multi-rate relaxation process in this complex.     

Applicability of the H NMR chemical shifts computed by the ab initio/GIAO-HF methodology to the study of geometrical features of Zn-porphyrin dimers

Several porphyrin dimers have been newly designed and synthesized to construct assemblies with 1,4-diazabicyclo[2.2.2]octane (DABCO) as a bidentate binding ligand. Semi empirical (AM1) and ab initio calculations have been used to study the assemblies generated by the organization of dimers and DABCO, including the computation of ¹H NMR complexation-induced chemical shifts using the ab initio/GIAO methodology. The diagnostic capacity of the theoretical method has been applied to explain experimental results and geometrical features of the complexes.     

Polarographic and voltammetric determination of trace amounts of 2-nitronaphthalene

The polarographic behaviour of 2-nitronaphthalene was investigated by DC tast polarography (DCTP) and differential pulse polarography (DPP), both at a dropping mercury electrode, and differential pulse voltammetry and adsorptive stripping voltammetry, both at a hanging mercury drop electrode. Optimum conditions have been found for the determination of 2-nitronaphthalene by the given methods in the concentration ranges of 2×10^–6–1×10^–4, 2×10^–7–1×10^–4, 1×10^–8–1×10^–4 and 2×10^–9–1×10^–8 M, respectively. Practical applicability of these techniques was demonstrated by the determination of 2-nitronaphthalene in drinking and river water after its preliminary separation and preconcentration using liquid–liquid and solid-phase extraction with limits of determination of 3×10^–10 M (drinking water) and 3×10^–9 M (river water).